Welcome to Kimia Panel Company

Technical specifications of Shiraz sandwich panel

Technical specifications of Shiraz sandwich panel

Today, with the progress of science and technology, traditional and old materials have been replaced by prefabricated and modern materials called sandwich panels. Sazeh Novin sandwich panel is a combination of three coherent and composite layers. This material has found a special place among structural engineers due to its special structure and unique characteristics.

In this article, we are going to review the technical specifications of Shiraz sandwich panels.

Shiraz sandwich panel

As detailed articles on sandwich panel were presented in previous articles, here we will briefly review the technical specifications of sandwich panel.


The sandwich panel is a prefabricated material with a combination of three layers, bounded on both sides by sheets, and the middle layer is covered with polyurethane foam. The two side layers are responsible for protecting the middle layer. The material of the upper and lower layer sheets is galvanized, aluzinc and aluminum. Alozinc is made of carbon steel, which is an alloy layer consisting of 55% aluminum, 43% zinc, 16% silicon. Aluminum element increases the structure’s resistance to corrosion and sheet wear.


The metal coating used in the lower and upper layers of the Kimia sandwich panel shows a very high resistance to corrosion and decay. The middle layer, which acts as the core of the sandwich panel, is thick and very light, and the task of this core is the proper insulation of the structure and adds features such as resistance to moisture, heat, and cold to the panel. These three layers together form a structure similar to It creates a sandwich and hence the title of sandwich panel.


Sandwich panel is mainly divided into wall and ceiling sandwich panels. Sandwich wall panel is a prefabricated material for covering all kinds of sheds, prefabricated buildings, sheds and sheds. The wall sandwich panel is available in two types: hidden screw and tabbed crotch.

The modern and prefabricated roof sandwich panel is used to cover all types of false ceilings, sheds, airplane hangars, etc. The ceiling panel is stepped or grooved in appearance and some of the step is used for the overlap.

کانکس در شیراز

Sandwich panel is divided into different types in terms of the material of the outer layers.

  • Double sided sandwich panel
  • Sandwich panel, one sheet, one paper
  • Sandwich panel, single sheet, single foil
  • Double foil sandwich panel
  • Double nylon sandwich panel

Technical points about Shiraz sandwich panel

Aluzinc sheet (aluminum + zinc), galvanized and aluminum used in two sandwich panel tops with a thickness of 0.5 and 0.7 mm in various colors of super polyester with a thickness of 25 microns on the outside and 7 microns in the color of a primer on the inside. The joint of the sheet with the middle insulation foam of hard polyurethane, which is considered among the best thermal and cold insulators with a closed cell structure.


Defined thickness in sandwich panel


Wall: 4, 5, 6 and 8 cm

Cold room sandwich panel 10, 12, 15, 18 and 20 cm and the length of the panels depends on the customer’s demand.

Roof sandwich panel with thickness of 4, 5, 6, 8 and 10 cm

The length depends on the buyer’s needs

Roof sandwich panel view with steps 3, 4 and 5

The foam used in the middle layer of the sandwich panel is available in various types. Polyurethane foam, polystyrene, xps and rock wool, glass wool, each of which gives special characteristics to the structure.

Technical points of polyurethane sandwich panel insulation

Polyurethane foam (PIR/PUR) with a density of 40±2 kg/m3

Environmentally friendly (no greenhouse gases and ozone layer devastation)

Reduced flammability and low ability to absorb moisture

Resistant to insect infestation and mold growth

The ceiling and wall sandwich panel company produces all kinds of polyurethane sandwich panels in compliance with high standards and quality. You can contact the sales experts to get the price of Kimia Panel sandwich panels.

Dear customer, you can contact our consultants for more information about Kimia Panel Shiraz products.

Get in touch with us:

contact numbers:

09120646825     07137731520-22-24

Factory Address: Shiraz – Industrial Town – Som Square – Northern Sooreh Blvd. – Sa’i St.

End of 801 Street – 802 Street

Address of the sales office: Shiraz – first square

Post a comment

Your email address will not be published.